Would have expected sturdier material or packing Would have expected sturdier material or packing
Item arrived cracked. Unable to ascertain how it was damaged as it was in a poly bag. Something could have hit the blister pack without leaving a mark…item could have been made with metal instead of plastic.. Read more Read less
Build quality
Delivery & packaging
R
Rodolini
Amazon.in
7 Mar 2016
★★★★★Verified purchase
It is also made of sturdy plastic which won't bend easily
I just spent about 2 weeks trying to get the LensAlign product to work. I was almost ready to give up and make something myself. I felt that I just couldn't figure it out then I ran across this product while I was researching how to use the LensAlign. First off, it comes with instructions! I can't tell you how much time I spent just trying to figure out how to use the other product. It is also made of sturdy plastic which won't bend easily. It folds up nicely for storage and has a bubble level built right in. I found this much easier to set up and view results. I already use the Datacolor ColorMunki for color calibration so I know they make good products and I am very glad I took a chance on this - it's a keeper. Read more Read less
Durability
Build quality
Ease of use
P
Phil
Amazon.in
11 Oct 2011
★★★★★Verified purchase
Great aid if you're willing to invest the time
A year ago I upgraded my camera to a Canon 7d, which has the ability to let you do micro focus adjustments for each of your lenses. I decided to exploit this feature, since I was suspecting that my 50mm f/1.4 was not as sharp as I thought it should be. I knew about SpyderLensCal and other products, but after reading about MF adjustment on websites, I figured I could accomplish the same thing for free. I tried several methods to accomplish this: Moiré patterns, focus charts, even cutting out a pattern and creating a paper version of LensCal. Even though I could observe some auto-focus anomalies, I always had problems with reproducibility and interpreting the results on my monitor (iMac 27"). I even tried to demonstrate to my photo group how 'easy' it was to calibrate the focus on your lenses. (The demo did not accomplish my goals). Not one to give in easily, I decided to purchase LensCal. I set up the unit (very easy), and positioned my camera and the target (not as easy). The bubble level on the LensCal was helpful. However, I found that putting it on a table was not the best place for it. Tip1: use a light stand or tripod to mount the target unit. Once it is level, all you need to do is raise or lower it to the proper position. You do have to be careful to make sure the front of the lens and the target are perfectly parallel. I used the grid in the viewfinder and my trusty eyeballs to achieve this. I don't know an easy way to do this, but I seemed to get good results with my method. When the camera is mounted (on a tripod) and leveled (the 7d has a nifty horizontal/vertical level display on the LCD), you need to place the camera a specific distance from the chart. Tip2: I used Datacolor's suggestion to place the target 5x the focal length of the lens being tested. This distance is debatable, since Canon suggests a 50x distance. However, I used the effective focal length, allowing for the crop factor (1.6 for Canon). So I placed the camera 50mm x 1.6 x 5 / 25.4 = ~16 inches from the target. Tip3: before shooting, set the camera to Av mode at the largest (widest) aperture. You can shoot small fine jpeg, but setup a user-defined adjustment that gives the maximum sharpness to make interpretation easier. I also used a spot focus to pinpoint the autofocus on the target square. Tip3: lighting is a factor and an overhead light may not be sufficiently bright or uniform. I flooded the target with soft light from one of my studio lights. I then took 5 shots using my remote shutter release at 0 mf adjustment, to see if there was any problem. (manually set the focus to infinity between each shot). Although you can review the results on your camera's LCD, I found it beneficial to upload the images into my computer. There, I used Aperture to review the images. Although this is sufficient, I found a better way to interpret the results. If you have Lightroom or Aperture I suggest doing the following: apply moderate edge sharpening to each image. Turn up the contrast as far as you can, then slowly increase the exposure adjustment. When you do this, the lines that are in focus on the chart image 'pop' out at you, showing the zone of focus. From there you can interpret whether you camera/lens is right on, or showing signs of back/front focusing. I found that setting the mf adjustment on my camera to negative numbers, increased the front focus. Positive numbers increased the back focus. I calibrated 3 lenses using this method in a few hours. Having set up a workflow, I can now do this whole process more quickly. Pros: easy to set up the target and level it unit is well-built results are reproducible (however, out of every 5 shots, usually 1 was 'off'. Canon recommends at least 3 shots for each setting, as the focus can fluctuate randomly). target unit folds up and is easily stored Cons: Datacolor manual is very general, and more detail would be appreciated. Web reviews help fill in some of the blanks. Setting up the target and camera positions properly can tax your patience, but that's the price you pay to do the calibration yourself. Oh yeah, I think a price of $30 would be even better for this type of tool. I also think there should be some more explanation about what kind of focus results you should expect from your lens. Is a properly calibrated lens focusing at one plane with details equidistant from the center, or should it skew toward the back (or front?). There is some debate about this, but whatever you prefer, you can achieve it using this system. There are also those who believe the high contrast nature of the focus target can actually fool the autofocus on your camera. I haven't observed this with mine, but all you can do is try it yourself and see if the results are worth it. (BTW, my 50mm lens was front focusing, and was easily corrected with a +5 adjustment on my camera.....and I have observed the results in my images). Read more Read less
Value for money
Ease of use
K
K. Carnes
Amazon.in
27 Dec 2022
★★★★★Verified purchase
Flimsy and expensive
I paid the price because I expected quality. It came broken inside the package. It was returned. I will replace it with something else. Read more Read less
Value for money
Build quality
Delivery & packaging
C
clyde
Amazon.in
15 Feb 2011
★★★★★Verified purchase
eye opener
I have been wondering how my camera/lens combination "saw" the image, and I was finally able to see that my system was focusing properly, but was very front loaded, with no rear depth. Since my Canon 7D nas the ability to change the focsu criteria for each lens, I was able to correct the focus with the Spyder Lenscal, so that I now have the correct front/rear focus balance to my photographs. This item was well worth the price. Read more Read less