SarahJo Griggs
Amazon.in17 Feb 2016
Everything worked out great with the unit and would recommend using this battery ...
The single battery in my APC Back UPS 650 Model# BP650S stopped working. I priced several options of replacing the entire unit or just the battery. To my surprise I found this battery at over half the price that APC wanted for the one battery. After much research I found myself ordering this battery type. When the battery arrived it was packed well with protectors the battery terminals to prevent any possible short circuit. I tested the voltage of the battery with my volt meter and found it was charged up at the 12 volt level. The old battery had a plastic safety insulator around the positive terminal that I moved to the new battery to prevent it from touching the top of the case when the battery is inside the APC. The two wires are short and can be pain to connect at times, but once you get them in the right angle you’ll be able to connect them and slowly insert the battery inside of the APC without the wires coming off. The process didn’t take but about 5 minutes to save a decent amount of cash instead of replacing the entire unit! It is very simple for anyone to do. Just take your time and make sure you don’t short out any battery terminal while doing so. I let the unit charge the battery for several hours to ensure everything was up to 100%. I then put a 30%-40% load on the unit and pulled the power from the unit to let it calibrate to the new battery capacity. Everything worked out great with the unit and would recommend using this battery to breath new life into your APC UPS. Read more Read less







