asher
Amazon.in7 Dec 2021
If you don't know how to work on a guitar...
One of the most common questions that asked is "How do they make this guitar so inexpensive". The answer on this guitar? Minimal setup. Thankfully, I know my way well enough around a set of tools to be able to set up, troubleshoot, and wire a guitar so for me, this was a minimal problem. For a beginner? This guitar will very quickly produce more arguments to give up than to continue practicing. I'm going to start with the headstock and work my way down. The tuners were loose and the retention screws had to be snugged in order for them to do their job. I've seen this on Fenders, Squiers, Gibsons, and Epiphones so it's neither here nor there. I don't know who in the cheaper markets decides that a double string tree is a necessity on any copy of a Squier/Fender...but it's not a necessity. Take the string tree off of the b & e strings, remove the string tree from the d & g strings and put it onto where the string tree for the b & e strings was. This smooths the tuning out and makes it a more fun guitar to play as well as reduces friction. The nut...everyone wants to know about the nut. It's plastic, it isn't lubricated. Detune the guitar and grab a mechanical pencil and mark the slots with graphite. That will lubricate the slots and allow the strings to slide up and down a little easier and make tuning more stable. The strings....wow, the strings....They are there because they are cheap and strings are expected. Honestly, IF you decide to purchase this guitar? Purchase a set of strings on the same order. The ones that come on this thing are there as a placeholder ONLY. You'll read multiple complaints about the neck here in the reviews. Either the truss rod needs to be adjusted, fret sprout causing slices in the hands, or uneven frets. This happens on any guitar. There is a large allen wrench that's included with the guitar that is there to adjust the truss rod in the neck which adjusts the bow or arch of the neck. A quick youtube search will instruct you how a truss rod works. My guitar DID need a truss rod adjustment which took all of 30 seconds. I had no fret issues, but I have had them on Gibsons and Fenders and the fix is a sanding sponge. Run the sanding sponge along the frets that are sticking out until it no longer hurts your hands. I had no problems with high or low spots on my frets surprisingly but for those that do? The solution is to get a sharpie, run it over the fretwires and then with a straight and flat edge (metal beam) go over the frets until no sharpie marks are on the fretwires, then crown them. While the neck appears to be rosewood...it has to be something that looks like rosewood but is a lot cheaper. Mine was dry as a bone, but some lemon oil rehydrated the wood and made it look a lot better. The wood that's used for the body is very lightweight. I have a classic vibe 50's squire that weighs at least a pound if not 2 pounds more than my grote. The grote is also very very soft. Paint is decent. Up close, you'll see a few imperfections here and there, from about 5 feet away, you're not going to notice anything special. Intonation......my guitar was NOT in any way shape or form intonated. The saddles were in a straight line, an intonated guitar should have a "lightning bolt" like shape to it. My low e string refused to intonate until I cut the saddle spring in half and only then was I able to intonate. Every other string intonated without issue. The tremolo/vibrato/whammy bar: My claw came with the screws buried into the wood. I won't go so far as to say that an impact driver was used to secure the screws, but it's metal on wood with 3 springs. For those that are familiar with the terminology, it was decked but not blocked. With a guitar this cheaply made though, you're better off not using the whammy bar at all. Electronics: Very cheap triple single coil setup. I had no issues until I went to use the neck position and the neck/middle position. I feel that it's a loose connection and can be solved with a soldering iron. Am I happy with this guitar? Yes, but only because I know how to fix the issues. This guitar cuts the financial corners to be sold so cheaply in two areas: parts, and quality control, and sadly it shows: BIG TIME The gig bag is a dust cover and should never be used to transport this guitar. If you're looking to acquire this guitar for someone that's new or doesn't know how to work on a guitar, please look to squier or Ibanez. This guitar will do far more to discourage someone that doesn't have the knowledge or the experience or at least be prepared to buy an additional set of springs and have a technician set up the guitar before you hand the guitar off. I'm not disappointed, I've purchased cheap guitars before so I knew what I was getting myself into with this one. "Let the buyer beware" Read more Read less
- Value for money
- Build quality
- Ease of use
- After-sales service










