Dickie T
Amazon.in13 Oct 2025
Really helps me make accurate mixes. There's noting like it for anywhere near the proce.
Before you start, make sure you have your monitor speakers located properly. They include a guide to help with this. Go through the process carefully, using the supplied calibration mic. NOTE: The mic requires phantom power - supplied by virtually all DAW interfaces. Be sure you turn it on. I did the longer setup (didn't take THAT long...). After all, we want to get the most from our investment! An A-B comparison with and without the correction reveals a definite difference: Listening is less fatiguing and feels more transparent. Be aware that you should have at least decent speakers to start with. My Behringer 3021A Truth monitors aren't bad to begin with, so the corrected results were quite impressive. NOTE: You should have your speakers in a close monitoring arrangement, especially in a less-than-optimal room. In the good news/bad news dept: The calibration data is loaded into a box that connects between your interface output and your powered monitor inputs. This is mostly great, in that ALL of your computer audio sources will benefit from the correction. The downside of this arrangement is that you'll have to do another calibration if you wnat to use the ARC system in, say, another studio. Apparently, there's no way to save multiple calibrations, so when you move back to your home studio, you'll have to redo the calibration process. Still, it's a great system. Read more Read less
- Ease of use