Harley
Amazon.in5 May 2026
Needs to be printed slower than PLA. Great color and very bendy.
Beautiful filament. Had initial problems with what looked like temperature or extrusion. This type of filament (TPU) is extremely sensitive to drag between the reel and nozzle, and my dryer was creating significant drag due to the angles involved. Propped up the back of my dryer with a toolbox insert, and secured the front from sliding with duct tape. Perfect prints now. I do recommend enabling pressure advance, for those who are new to TPU. Slow down all print speeds to 20mm/s - 30mm/s, bring temps up into the 225c range for the nozzle and the bed should be around 50c first layer and 40c other layers. If you're getting clean prints with those settings on a Z square, then you can experiment with faster infill speeds, but I would keep walls and first layer speeds pretty slow. If your Z square isn't adhering well then you have other problems! Overall, definitely can't print this as fast as PLA+, but the flexibility (pun intended) is great! Read more Read less
- Performance












