MW
Amazon.in9 Sept 2026
Good quality, prints well
Good quality, prints well Read more Read less
- Build quality
DudScore
Mixed signals. Compare before you buy.
Early score: few reviewsToday's price against the prices it has sold for.
From 12 days of our own price history, across stores.
No close alternatives in this category and price range yet.
₹9,681
On Amazon.in
Ratings on stores (15)Reviews on Whydud (10)
Customer rating
3.6out of 5
15 ratings across stores
| 5★ | 67% | |
|---|---|---|
| 4★ | 0% | |
| 3★ | 0% | |
| 2★ | 7% | |
| 1★ | 27% |
100% verified purchases
MW
Amazon.in9 Sept 2026
Good quality, prints well Read more Read less
CBroussard
Amazon.in11 May 2026
Excellent filament with a really smooth finish and consistent color throughout the spool. Prints came out clean with great layer adhesion and very minimal stringing. The matte look gives models a premium appearance, and it worked flawlessly on longer prints. Definitely one of the better filaments I’ve used. Read more Read less
Victor Robles
Amazon.in15 May 2026
Muy buen filamento, ideal para figuras 3d Read more Read less
sniporbob
Amazon.in18 Apr 2026
It makes me incredibly sad that they have taken a product I loved and destroyed it. I've printed somewhere around 50 spools of Polymaker filament (the majority PLA but many other types too), and this "new formula" is horrendous. Their PLA was previously called PolyLite PLA Pro. The new version is called Polymaker PLA Pro. So far I've printed approximately one spool worth of the new formula between the two spools I purchased, and will be throwing what remains in the trash unless Polymaker reaches out and asks me to send it back so they can analyze it. This filament is unprintable. I've had well over 10 nozzle jams in a single spool. At this particular moment, I don't think I'll ever be buying this new formula again. Lets start from the top, however... Packaging: Some bean counter or upper management penny pincher decided the packaging needed downgrading. The label on the old version's box was large and had a color picture of the filament on the side. The new version has a black and white label that is text only. No more quickly glancing at the box to figure out where a particular color of filament is. How helpful of them to remove the ability to quickly identify the contents! Upon opening the box, with the prior version you'd find a vacuum sealed tear-open plastic pouch with a re-closable ziplock seal. The new version has a tear-open pouch but no re-closable seal. Once you open it, it's open. You can't put the filament back in with desiccant and zip it closed like before. This is a big downgrade for anyone who relied on these bags to keep their filament reasonably dry between prints of various colors. To Polymaker's credit, they at least did not shrink the desiccant packet size. Performance: The new filament has new print settings. The old formula recommends 190C - 220C printing temperature. The new formula recommends 210C - 230C. I originally didn't notice the new temperature recommendations on the spool, so when the old formula metallic silver ran out I put the new formula metallic silver on the printer and started up the print again using the same gcode (I was making a bunch of identical gridfinity bases). The print was set to0.2mm layer height, 30mm/s first layer, 70mm/s outer walls and top/bottom, and 180mm/s inner walls and infill. These settings worked perfectly for an entire spool of the old formula filament. With the new formula spool, I got a nozzle jam on the third print. I thought this was maybe a fluke, so I did a bunch of cold pulls and got the printer running again. It completed one print and jammed on the second. I thought maybe it was a problem with the Ender 3 V3 SE heat break (the PTFE in this previously deteriorated on my other printer and caused jams) so I replaced the heatbreak with a bimetallic piece and installed a new nozzle. I also cleaned the drive gears (and would clean them after every jam from this point on). The filament didn't make it through a single print without jamming. I realized there was a new recommended temperature so I increased the temp from 220 to 225. Jam. Increased it to 230. Jam. Increased it to 235. Jam. Maybe it needs to print slower? Jam at 30mm/s. Maybe it needs to print faster? Jam at 180mm/s. Jam at 70mm/s. Jam on the first layer. Jam on the infill. Jam on one of the top layers. Jam on the exterior wall. By this point I had used up most of one spool and was completely sick of unclogging the nozzle, not to mention my thumb being torn up from running the extruder gear by hand. I had also realized that the problem was with the filament, not my printer or the settings. Surely the second spool would be better, I thought. Nope! One successful print and then a jam! I unloaded this trainwreck of a filament, used some of the old formula PolyLite PLA Pro to do a series of cold pulls which cleared out the nozzle, and then proceeded to print half a spool of the old formula without issue. I looked at the end of the filament cold pull under a microscope, and there appeared to be some sort of clear material that was causing the jam. Whatever it was, it could not be pushed through the nozzle. I don't know if the penny pinchers had any say in the new formula but it sure seems that way to me. That's the only explanation I can come up with for going from one of the best filaments to the second worst I've ever seen (the worst being a seriously defective roll of Hatchbox). Either way, in conclusion, the new formula is garbage. Do not buy it if you value your sanity. The old PolyLite formula is fantastic but once that's no longer available I will not be using any more of Polymaker's PLA. Read more Read less
Jean Boucher
Amazon.in14 Aug 2026
Love the color, polymaker is one of my favorite filament Read more Read less
Amazon Customer
Amazon.in13 Oct 2026
The metallic silver is the first roll of polymaker that I've ever had bad luck with and had to return. Clogged 2 nozzles and on visual inspection the quality of the filment looked horrendous. Very uncharacteristic of polymaker. Read more Read less
Ironhead
Amazon.in23 May 2026
Look let's be honest. Polymaker makes GREAT filament. It prints well runs true to color, does not arrived tangled, does not clog nozzles and is just all around outstanding. Unfortunately they ONLY provide it on cardboard spools and I simply cannot recommend you order cardboard spooled filament from Amazon. Amazon damages at least 1 out of every 2 cardboard spools they deliver to me and that damage means the spools won't run in my AMS. I love Polymaker and would use their filament exclusively if they would offer refills that I could install on my existing plastic spools. Read more Read less
C
Amazon.in1 Aug 2026
I ordered a roll of the metallic bronze filament to print some household decorations. It just keeps breaking and clogging my nozzles. I've tried drying it first. I've tried printing from the dryer. I've tried printing not from the dryer. No matter what I try about 50% of my prints fail due to the filament breaking mid print. I'm using a Prusa core one, and I get some really good prints, but not with this filament. The other thing is it tends to clog the nozzle permanently if you're not careful. Something about the sparkles causes clogs and they are impossible to get out. I already had to order a new nozzle once. This time I'm going to try some .2mm needles instead and see if I can clear this nozzle. The appearance is nice, but if you can't print with it what good is it. I love polymaker and buy their PA6 all the time, but I probably will be passing on any metallic stuff from them (or anyone) in the future. Read more Read less
Victoria
Amazon.in11 Aug 2026
I love the color of this. It takes my prints to the next level! Read more Read less
tomara buhr
Amazon.in18 May 2026
Prints easily and looks great Read more Read less