PM
Amazon.in21 Oct 2019
SSD brings real speed to your computer... processors core i5, i7 are secondary
I have a core i5 5th generation, 8GB RAM Lenovo G50-80 laptop. And it behaved very sluggish after update to Win 10 1 year back... really slow, and I always wondered what is the reason. Actually, 64 bit Win10 is too much for HDDs to handle. You will notice that disk peaks to 100% most of the time in Task Manager. Despite many days of searchign and trying many online solution to reign in W10 i was unsuccessful in speeding the machine. SO i came across this SSD thing, and upgraded to Samsung SSD by removing the Optical Disk and using a 9mm caddy for SSD. I Used Samsung Magician and Samsung Data migration Software to clone the HDD. Cloning took nearly 2 hours for 400 GB data. And the computer now boots like... Ferrari.. ... Amazing speed. Now Processor works at 95% and Disk at 5%.!!!! Samsung software is very easy to use even for untrained guys. So highly recommended. And with Samsung, service will always be available, so peace of mind. HIGHLY RECOMMENDED!!!! Crucial MX500 is also as good as Samsung but only thing is that they dont have that much service support in India as Samsung. As for others, I will suggest choose between these two as their quality and speed is the best. Some Important Tips for starter people using HDD caddy and those with Lenovo laptops: 1. Usually ODD uses similar SATA 3 slot as HDD (6 GBPS speed) but it may vary sometimes and ODD may have SATA 2 slot (1.5/3 GBPS speed). So best is always to replace the cloned SSD in original Internal HDD slot. 2. After cloning, in some machines (like my Lenovo G50-80) your BIOS may not read the SSD as a bootable drive and repeatedly switch back to HDD for boot. What you need to do is swap SSD into main HDD slot and the original HDD into caddy slot and then try to boot. If the machine says: Failed to find Windows boot manager, try to hit some options that come over. In my case, it automatically loaded from cloned disk from HDD slot after initial boot failure when I chose some options randomly.. If the problem persists, you can put your Windows rescue disk and start windows repair. In most cases it will solve the problem. 3. To use the SSD, you will need UEFI enabled Bios (Most machine today or last 5-8 years will have it already), and set the boot priority to SSD. 4. After initial cloning, Windows 10 will fail to identify the cloned SSD in Disk manager and the disk will appear unmounted. This is because a cloned disk will have same signature as original HDD and it causes conflict in the Windows environment. To get around this you will need to use DISKPART command and change the signature of the HDD. There are some videos which tell how to do that on internet. But be sure to change the signature only after verifying that the SSD is indeed booting your machine. Good Luck guys.. enjoy the speed. Read more Read less
- Durability
- Build quality
- Ease of use
- Performance
- After-sales service












