Thomas Town
Amazon.in4 Apr 2016
Versatile, well-made, and well-engineered! Versatile, well-made, and well-engineered!
One of the smartest airflow designs I've ever seen that also economizes space and allows for ease of travel. The two side vents are located on the top left and bottom right, respectively, of the case, with a riser card for the PCIe slot. What you're left with is the top left vent exposing the CPU and PSU fans, and the bottom right vent open for the GPU. With the new Z170 ITX motherboards out there, you can really max this chassis out! Power: You can fit an SFX-L (lengthened) power supply easily into this chassis. You may want to have extra SATA and Molex cables on hand to run power to each component, as space will be a little limited. Hard Drives: There are two snap-in-place slots for 2.5" hard drives in the main compartment (as the graphics card has its own compartment with separate airflow). There is a cable pass-through (hole) between each compartment that allows you to mount a third hard drive far at the back of the video card compartment as long as you get a reasonably-sized video card. And I believe if you opt out of an ODD, you can mount a fourth one as well (check back with me later, once I verify). Slim Optical Drive: The optical slot is tool-less, which is nice, except the front bezel cover plate doesn't fit well in the case. I could not get the Blu-Ray drive to open using the included ODD cover. It was jammed. I just used a different bezel and it works fine, though not as pretty as I like. I have an ultra-slim (9.5mm) drive in the ODD slot, which now leaves a 3mm gap between the drive and the opening. I find this minorly irritating, since this provides exhaust for the air intakes. Also, get a Syba SATA to Mini SATA Cable with Molex Power Adapter if you plan on using the optical drive. I forgot to grab one originally, but it's necessary for the SilverStone PSU's. Video Card: You can fit any card in here. Seriously the space is huge. My GTX 970 looks tiny in the video slot. There is also a little rubber clamp that supports the back end of your card so that it doesn't bend in the middle. Also, when you open the video card compartment, you get access to the bottom of your motherboard, where the m.2 slot is often found. This also allows for easy installation of the CPU cooler. Airflow: A++!!! I can't tell you how thrilled I am at how silent I can keep this running. Each vent is over fan intakes blowing directly onto your mobo/GPU/CPU/PSU. And each vent is covered by an easily removable/cleanable dust filter!! Way to go, SilverStone!! CPU Cooler Height: This one is tricky. The website says that it can have up to a 58mm cooler, but I was able to fit in a cooler up to 65mm. I have a 95w TDP processor, which can get REALLY hot, so I really couldn't skimp on the cooler. This is what I did, and I recommend it for anyone else who buys this case: Get a DEEPCOOL GABRIEL CPU Cooler and replace the fan with a Noctua 12cm iPPC 2000rpm fan . I've found that this JUST barely fits into this case cleanly. I can now overclock my CPU and keep my RAM and chipset ultra-cool with the oversized fan. I tried all sorts of CPU fans, but the Noctua industrial 2000rpm fan really was the perfect mix of quietude and cooling power. Anything less powerful wouldn't be able to handle my CPU and anything more powerful is too loud. Cons: As I mentioned, the optical drive cover has a poor fit for the case and gets jammed. But that only bugs me because I happen to use an ultra-slim drive. The feet are useless. They fall off any time you move the tower around. The chassis comes with rubber feet for placing it horizontally, but you would not be able to set anything on top, since the vents are really necessary for the airflow. Still, that's really all I can gripe about. I saw pictures of some guy who fit a liquid cooler into the case, but I seriously doubt that's a feasible solution for most consumers with this case. You'd have to do some major rigging to get that to work. Pros: Airflow. Well-engineered for versatility. Great design. SOLID craftsmanship. Great for gaming or home theater use. Here is my rig. I built this with mostly top-of-the-line components as of February, 2016: Motherboard: Gigabyte LGA1151 Intel Z170 Mini-ITX DDR4 Motherboard CPU: Intel Core I7-6700K 4.00 GHz 8M Processor Cooler: DEEPCOOL GABRIEL CPU Cooler / Noctua 12cm iPPC 2000rpm fan combo PSU: SilverStone 500W SFX-L RAM: Vengeance LPX 32GB DDR4 DRAM 2400MHz C14 Memory Primary SS Drive: Samsung 950 PRO-Series 256GB M.2 Internal SSD Secondary SS Drive: Samsung 850 EVO 1 TB 2.5-Inch SSD Video Card: EVGA GeForce GTX 970 4GB FTW Graphics Card Read more Read less
- Build quality
- Ease of use
- Performance

