nicgravel
Amazon.in25 Apr 2019
Good quality
Like the handle and the spaces in this small case. Very easy to move. Case is strong. Not too hard to install everything. Best when using a modular psu. Read more Read less
- Build quality
- Ease of use
We may earn a commission when you buy through these links. It never changes the price or the order.
DudScore
Mixed signals. Compare before you buy.
Early score: few reviewsWe're still building this product's price history.
From 1 day of our own price history, across stores.
No close alternatives in this category and price range yet.
₹35,187
Out of stock at our last check
Ratings on stores (107)Reviews on Whydud (5)
Customer rating
4.1out of 5
107 ratings across stores
| 5★ | 52% | |
|---|---|---|
| 4★ | 22% | |
| 3★ | 15% | |
| 2★ | 6% | |
| 1★ | 5% |
100% verified purchases
nicgravel
Amazon.in25 Apr 2019
Like the handle and the spaces in this small case. Very easy to move. Case is strong. Not too hard to install everything. Best when using a modular psu. Read more Read less
Thomas Town
Amazon.in4 Apr 2016
One of the smartest airflow designs I've ever seen that also economizes space and allows for ease of travel. The two side vents are located on the top left and bottom right, respectively, of the case, with a riser card for the PCIe slot. What you're left with is the top left vent exposing the CPU and PSU fans, and the bottom right vent open for the GPU. With the new Z170 ITX motherboards out there, you can really max this chassis out! Power: You can fit an SFX-L (lengthened) power supply easily into this chassis. You may want to have extra SATA and Molex cables on hand to run power to each component, as space will be a little limited. Hard Drives: There are two snap-in-place slots for 2.5" hard drives in the main compartment (as the graphics card has its own compartment with separate airflow). There is a cable pass-through (hole) between each compartment that allows you to mount a third hard drive far at the back of the video card compartment as long as you get a reasonably-sized video card. And I believe if you opt out of an ODD, you can mount a fourth one as well (check back with me later, once I verify). Slim Optical Drive: The optical slot is tool-less, which is nice, except the front bezel cover plate doesn't fit well in the case. I could not get the Blu-Ray drive to open using the included ODD cover. It was jammed. I just used a different bezel and it works fine, though not as pretty as I like. I have an ultra-slim (9.5mm) drive in the ODD slot, which now leaves a 3mm gap between the drive and the opening. I find this minorly irritating, since this provides exhaust for the air intakes. Also, get a Syba SATA to Mini SATA Cable with Molex Power Adapter if you plan on using the optical drive. I forgot to grab one originally, but it's necessary for the SilverStone PSU's. Video Card: You can fit any card in here. Seriously the space is huge. My GTX 970 looks tiny in the video slot. There is also a little rubber clamp that supports the back end of your card so that it doesn't bend in the middle. Also, when you open the video card compartment, you get access to the bottom of your motherboard, where the m.2 slot is often found. This also allows for easy installation of the CPU cooler. Airflow: A++!!! I can't tell you how thrilled I am at how silent I can keep this running. Each vent is over fan intakes blowing directly onto your mobo/GPU/CPU/PSU. And each vent is covered by an easily removable/cleanable dust filter!! Way to go, SilverStone!! CPU Cooler Height: This one is tricky. The website says that it can have up to a 58mm cooler, but I was able to fit in a cooler up to 65mm. I have a 95w TDP processor, which can get REALLY hot, so I really couldn't skimp on the cooler. This is what I did, and I recommend it for anyone else who buys this case: Get a DEEPCOOL GABRIEL CPU Cooler and replace the fan with a Noctua 12cm iPPC 2000rpm fan . I've found that this JUST barely fits into this case cleanly. I can now overclock my CPU and keep my RAM and chipset ultra-cool with the oversized fan. I tried all sorts of CPU fans, but the Noctua industrial 2000rpm fan really was the perfect mix of quietude and cooling power. Anything less powerful wouldn't be able to handle my CPU and anything more powerful is too loud. Cons: As I mentioned, the optical drive cover has a poor fit for the case and gets jammed. But that only bugs me because I happen to use an ultra-slim drive. The feet are useless. They fall off any time you move the tower around. The chassis comes with rubber feet for placing it horizontally, but you would not be able to set anything on top, since the vents are really necessary for the airflow. Still, that's really all I can gripe about. I saw pictures of some guy who fit a liquid cooler into the case, but I seriously doubt that's a feasible solution for most consumers with this case. You'd have to do some major rigging to get that to work. Pros: Airflow. Well-engineered for versatility. Great design. SOLID craftsmanship. Great for gaming or home theater use. Here is my rig. I built this with mostly top-of-the-line components as of February, 2016: Motherboard: Gigabyte LGA1151 Intel Z170 Mini-ITX DDR4 Motherboard CPU: Intel Core I7-6700K 4.00 GHz 8M Processor Cooler: DEEPCOOL GABRIEL CPU Cooler / Noctua 12cm iPPC 2000rpm fan combo PSU: SilverStone 500W SFX-L RAM: Vengeance LPX 32GB DDR4 DRAM 2400MHz C14 Memory Primary SS Drive: Samsung 950 PRO-Series 256GB M.2 Internal SSD Secondary SS Drive: Samsung 850 EVO 1 TB 2.5-Inch SSD Video Card: EVGA GeForce GTX 970 4GB FTW Graphics Card Read more Read less
Bill
Amazon.in2 Dec 2017
This is a great case overall. I like the form factor a lot. I need a small case that I can carry around when traveling, meanwhile I need the case to be power enough to house a full size GPU. This case is one of its kind, the only option I found that has a carrying handle. I'd think many people share the same need for this kind of case, somehow, this is the only product you can find. On the low lights, you need to have some good cable management when using this case. I'm an unorganized person, I wouldn't care about cable management at all normally. But I realized that if I don't manage the cables, I can't close this case. This is really not a drawback of the product, it's just a trade off you will have to make using this case. Other than this, there are 2 things I don't like. first, the case comes with bunch of screws. They look quite similar to each other, but slightly different. You're supposed to use certain screws at certain places, but the manual isn't clear about that. The manual refers to different kinds of screws using incomprehensible codes. I mixed those screws with screws came with other parts. I thought some screws came with the heat sink were the ones I was supposed to use to attach the handle. I almost damaged the case by screwing the them in by force. Had different kinds of screws been packaged in different bags and properly labelled, I wouldn't have made this mistake. Also, I don't like the handle. The case itself looks sturdy and high quality, but the handle is made in plastic. The machine, once fully assembled, can be quite heavy. I dare not carry this case using the handle and walk long distance, I'm afraid that it could break. Plus, the grip of handle has an impractical design. It's kinda sharp and very uncomfortable to hold. I say the handle is more of a decoration than of any practical use. Read more Read less
Poupal
Amazon.in24 Feb 2020
Small and easy to get from places to places. The pnly thing bad with the case is the need to unscrew 6 screws everytime you need to get in. The handle must come off everytime you have to change something. Good for a fix build. Not so much for testing gear and different setups Read more Read less
Andrew M
Amazon.in29 Dec 2017
I bought this case to specifically build a gaming rig with as small a footprint as possible. Cooling is decent, as there are two large vents on the sides and two smaller ones on each end. The case will accommodate all but the most massive of Video Cards (nothing longer than 13", nothing wider than 2 PCIe ports. It has room for two 2.5" HDs, and room for another one or two if you go with a mid-size to smaller sized GPU and have some extra mounting screws handy. The handle is a nice touch, but I can't say that I have used it since setting it up in its intended place. There is an option for a slim optical drive, but another HD in its place makes more sense. The integrated dust covers are a nice touch, and are removable for easy cleaning. Cooling is achieved via the component cooling, as there is no system fan, or obvious place to mount one. Luckily the PCIe risers included in the case allow the GPU to be in a separate compartment on its own, so you don't have it heating up/being heated up by the PSU/CPU/RAM/MB. The only downside I can see/foresee is the low clearance between the CPU and the side panel, so don't expect to mount any massive Heatsink/Fan combos (58mm clearance). The nice thing about the low clearance though, is that a CPU fan that almost touches the side panel will either be blowing/sucking air directly out or from outside the case. I've also noticed some different mods online where people have added additional cooling fans to the case, but those were usually builds involving massive GPUs, tons of overclocking, and as many SSDs as can be crammed into the case. Overall, I have been very happy with it. Read more Read less