Mathews Sunny
Amazon.in27 Oct 2020
Dangerous if not properly used Dangerous if not properly used
Bought from Appario for 299. The board differs significantly from the xcluma image. Not a problem though. The charge current on these boards is always fixed at the maximum 1Amp (here using R3). This is too much current for smaller batteries especially if they don't have their own onboard protection. As in, expect fire and explosions. In a full featured 4056 circuit, pin 1 should be connected to an NTC thermistor which will detect an overheating battery and prevent a fire, but on these boards pin 1 is shorted to ground and disabled. I replace R3 (1.2k) with 2.7k or 4.7k when necessary. This is the bare minimum you should do when using this product. You can also cut the trace from pin 1 of TC4056 and add an NTC thermistor+resistor if you want safe faster charging. Removing C3 first will make this easier. Refer to the datasheet for this. Read more Read less














