SilMonDrop
Amazon.in22 Aug 2026
Great for TWS
Works great for mono or TWS systems. Definitely need some sort of case to put it in to keep from shorting the amp out. Read more Read less
We may earn a commission when you buy through these links. It never changes the price or the order.
Today's price against the prices it has sold for.
From 115 days of our own price history, across stores.
₹4,559
On Amazon.in
The nearest alternatives in this category and price range.
Indigo Exterior Sheen Emulsion Gold Series Low Dirt Pickup UV Resistant Exterior Paint Elegant Sheen Finish Weather Guard Sheen Finish SPRING BUD Colour Code 9332, ES2 - 20 Litres₹5,398Scored 61
OnePlus Buds 3 TWS, in Ear Earbuds with Sliding Volume Control and 49dB ANC Gaming Bluetooth Headset (Minty Green, True Wireless)₹4,299₹260 cheaper
OnePlus Buds 3 Truly Wireless Bluetooth Earbuds with Upto 49dB Smart Adaptive Noise Cancellation,Hi-Res Sound Quality,Sliding Volume Control,10mins for 7Hours Fast Charging with Upto 44Hrs Playback₹4,984Similar priceRatings on stores (75)Reviews on Whydud (7)
No customer photos yet. Add yours with a review
Customer rating
4.5out of 5
75 ratings across stores
| 5★ | 77% | |
|---|---|---|
| 4★ | 11% | |
| 3★ | 4% | |
| 2★ | 1% | |
| 1★ | 7% |
100% verified purchases
SilMonDrop
Amazon.in22 Aug 2026
Works great for mono or TWS systems. Definitely need some sort of case to put it in to keep from shorting the amp out. Read more Read less
maksym
Amazon.in21 May 2026
To build speakers- ok. Nothing more serious. Has a delay so that not for the some instruments. Read more Read less
Travis Vampran
Amazon.in30 Jul 2025
Small but very powerful, puts out very clean music. Must buy for any small speaker build. Read more Read less
About The Details
Amazon.in20 Jan 2026
UPDATE: ZK-1001U works when supplied with sufficient power from the power supply, of course! At its 100W rated output power, the supply needs at least that or more, such as 200W peak. In my application, I was hoping for just 5 Watts peak. Idle power is approximately 0.4 amps so at 9V was 3.6 Watts as indicated by my bench power supply. This ZK-1001U sort of worked on a 9V "1300mAh" battery. Put in quotes because these batteries are not good for the rated current in my tests and are more like half or less. giving more like 5 Watts available. On a 9V battery, when I connected a guitar to the auxiliary input it sounded like it was cutting out. To use as a portable, a battery must have sufficient capacity and the common 9V battery doesn't have sufficient capacity. On the 9V battery I used, the Aux input and Bluetooth to my phone worked but the USB thumb drive didn't play. It looked like the thumb drive was being accessed as the light blinked or paused by pressing the volume knob. When I connected it to a bench power supply it showed 9VDC at 0.37Amps with the USB thumb drive and 0.27Amps with the thumb drive removed. On the bench power supply the thumb drive worked - music played from it. In the past, I had problems with many switching type DC adapter power supplies creating noise. The USB thumbdrive worked using a LITEON PA-1041-0 12VDC/3.3Amp adapter power supply I had for a HP monitor. No obnoxious noise. So, this amplifier doesn't work on a 9VDC battery - just insufficient power available to operate correctly. I hoped it would work as a mini cigar box guitar amplifier but on the 9V battery it was cutting out. If looking for a low power build, I had good results using the HiLetgo 2pcs TDA8932 35W Mono Digital Amplifier Board but it is sensitive to noise, both from the power supply and induced hum. In a non-metal case, the case of the volume control must be soldered to the input jack's ground and the panel needs to use a copper shield tape grounded that is also grounded to the input jack. (That is what I did anyway.) Original Review: Put the heatsink on as shown in the photo. I added two small heatsinks on the ICs on the right side (knobs facing you). I only tried a USB stick with MP3 files and the AUX input (mono 3.5mm plug) to a signal generator. The volume is a switch that selects the input. I didn't try other features. I powered it with a variable power supply as I was interested in running it on a 9V battery. It draws about 0.3A (300ma) so a 600mah battery will probably actually be half of 600mah in reality so would last 1 hour. I'll use a DC power jack and connect the (-) terminal that is a switch (opens when the plug is inserted) to remove the battery. The battery I plan on using is USB-C charged. A chassis USB-C cable to male plug will be inside. The parts on the board get a little hot. Not sure about longevity in a box without good air movement. As I didn't try other features and it works as I tested I gave it 5 stars. It seems to work as intended. Read more Read less
Nathan
Amazon.in11 May 2026
Very well made. Work as they should. Read more Read less
MB
Amazon.in21 Dec 2025
Adjust accordingly!!!!!!!!! This amp is amazing IF YOU ADJUST IT RIGHT!!! Thought something was wrong until I sent it back and got another one and it was going the same thing. After adjusting it correctly it work very good. Highly recommend Read more Read less
kenneth strickland
Amazon.in21 May 2026
Great power. Easy to set up. Bluetooth works great. Sounds fantastic. Read more Read less